Home  |  Business Hours  |  Ordering Info  |  Engine Service  |  Contact Us
Products
Engines
DA-200
DA-170
DA-150L
DA-120
DA-100L
DA-85
DA-70
DA-60
DA-50R
G-50
DA-35
Propellors
Air Models
Menz
Mejzlik
Vess
Xoar
Exhaust
DA Mufflers
KS Exhaust
MTW Exhaust
Slimline Mufflers
Accessories
Spinner
Mejzlik
TruTurn
Aircraft
Delro Modelltechnik
ZN Line Aircraft
Additional Products
Wild Berry Prod. Shootout DVD
DA Fuel Dot
Desert Aircraft Apparel
News
Tucson Aerobatic Shootout
2012
2011
2009
2008
2007
2006
2005
2004
2003
2001
Tournament of Champions
2002
2000
1999
1998
Gallery
The Desert Aircraft Team
 
Kokam
KOKAM Battery Charger
LIPO-402:  $119.00

The LIPO-402 battery charger charges up to four lithium polymer cells in series connection. Six different charging currents can easily be set using a jumper. The number of cells (1 to 4) is also selected using a jumper. The battery charger is supplied with a 12V car battery or a mains adapter (13.8V and 3A). The LIPO-402 charger can only charge lithium polymer cells. Using a high-quality integrated MAXIM charging controller, the batteries are absolutely fully charged, i.e. the available cell capacity is fully utilized. The charging status display is given on 3 LEDs. The KOKAM LIP0-402 is suitable for lithium polymer batteries with a capacity of up to 1.5Ah (for charging with 1C).

Power Supply: 11-14V DC (car battery or mains adapter 13.8V / 3A)
Current Consumption: Min. 100mA - Max. 2.5A @ 12.5V
Reverse Battery Protection: Yes
Connection Cable: Highly flexible 1.0 mm with alligator clips red/black
Charging Capacity: Max. 25W
Charging Current:  0.1A / 0.25A / 0.5A / 0.75A / 1.0A / 1.5A
Charging Voltage: 1 - 4 LiPo cells
Battery Connection: 4 mm sockets red/black
Charging IC: MAX 745
Display: 3 LED's
Operation: By Jumper
Confirmation (battery full): Optical
Weight (with cable): 3.53 oz
Dimensions (w x h x d): 4.21" x 1.61" x .51"
Warranty: 2 Years


MPX Charging Cable:  $13.00
Charging cables with Multiplex high-current plugs for LONGGO batteries and other applications. A special version (V-cable) is available for charging two LONGGO batteries via a battery charger outlet. The batteries are set up in parallel in this case. The highly flexible charging cables have a diameter of 1.0 mm2 and can therefore carry high currents. High-quality, gold-plated 4mm bunch plugs ensure low-ohm contact with the charging sockets of the battery charger.


MPX Connector Set:  $10.00
A new type of housing was developed to enable simple and effective fastening of the MPX-plug/socket into the model. The first step of installation involves gluing the plug (or the socket) into the housing with super glue. After the glue has dried, the cables are soldered to the plug and insulated with heat-shrinkable sleeves. The ready-made connector plug can now be screwed down from behind on the fuselage side, a slat or a root rib (e.g. for servo contacting). The attractive panel then provides a clean finish. With this fastening, it is possible to charge the batteries directly from outside without opening the fuselage. It is standard for the high-capacity LONGGO batteries to have this type of socket housing on the charging cable. Two different heights are available (4.6 mm and 5.3 mm), as well as two panel colors (black and white). The housing system includes, per pack: 2 each, housing, panel, screws M2.5x10, and stop nuts.

Latest Headlines
News
Final Results Are Posted For The 2012 Shootout
The Warranty on all single and twin cylinder engines is now Three Years!
Our Masterpiece: The DA-200 is now available.
Click Here For Info On The Many Fine Products DA Stocks.
 

Facebook